Toshiba TLCS-900/H1 Series Manual page 101

Original cmos 32-bit microcontroller

Hide thumbs Also See for TLCS-900/H1 Series:

Table of Contents

Port 7 (P70 to P76)

Port7 is a 7-bit general-purpose I/O port (P70 is used for output only). Bits can be

individually set as either inputs or outputs by control register P7CR and function register

In addition to functioning as a general-purpose I/O port, P70 to P76 pins can also

function as interface-pins for external memory.

A reset initializes P70 pin to output port mode, and P71 to P76 pins to input port mode.

Setting the AM1 and AM0 pins as shown below and resetting the device initialize port 7

to the following function pins:

Port read data

Port read data

Initial setting of P70 pin

Function Setting after reset is released

P7FC register

P7CR register

P7FC register

Figure 3.7.9 Port7

Don't use this setting

Don't use this setting