Toshiba TLCS-900/H1 Series Manual page 469

Original cmos 32-bit microcontroller

Hide thumbs Also See for TLCS-900/H1 Series:

Table of Contents

(3-2) SPI Interrupt Enable Register (SPIE)

The SPIIE register enables or disables the generation of four types of interrupts.

This bit enables or disables the TEMP interrupt.

This bit enables or disables the RFUL interrupt.

This bit enables or disables the TEND interrupt.

This bit enables disables the REND interrupt.

Note: The SPIC supports four types of interrupts; two transmit interrupts (TEMP,and TEND, both of which causes the

generation of the INTSPITX interrupt request) and two receive interrupts (RFUL and REND, both of which

causes the generation of the INTSPIRX interrupt request). However, for the proper operation, select either one

of the TEMP and TEND interrupts and also select either one of the RFUL and REND interrupts. (Simultaneous

use of the TEMP and TEND interrupts is prohibited, as well as the simultaneous usage of the RFUL and REND

interruptsy.)

SPIIE Register

Figure 3.17.10 SPIIE Register