(9) Transmission controller
• In I/O Interface Mode
In SCLK Output Mode with the setting SC0CR<IOC> = "0", the data in the
Transmission Buffer is output one bit at a time to the TXD0 pin on the rising edge
or falling of the shift clock which is output on the SCLK0 pin, according to the
SC0CR<SCLKS> setting.
In SCLK Input Mode with the setting SC0CR<IOC> = "1", the data in the
Transmission Buffer is output one bit at a time on the TXD0 pin on the rising or
falling edge of the SCLK0 input, according to the SC0CR<SCLKS> setting.
• In UART Mode
When transmission data sent from the CPU is written to the Transmission
Buffer, transmission starts on the rising edge of the next TXDCLK.
92CF30-294
TMP92CF30
2009-06-12