A: Initialization; A1: Initialization - YASKAWA FSDrive-MV1000 Parameter Manual

2.1 A: Initialization

2.1 A: Initialization
The initialization group contains parameters associated with initial setup of the drive. Parameters involving the access
levels, initialization, and password are located in this group.

◆ A1: Initialization

A1-00: Language Selection
■
Selects the display language for the digital operator.
Note: This parameter is not reset when the drive is initialized using parameter A1-03.
No.
A1-00
Setting 0: English
Setting 1: Japanese
A1-01: Access Level Selection
■
Allows or restricts access to drive parameters.
No.
A1-01
Setting 0: Operation only
Access is restricted to parameters A1-00, A1-01, A1-04 and all U -
Setting 1: User Parameters
Access to only a specific list of parameters set in A2-01 through A2-32. These User Parameters can be accessed using the
Setup Mode of the digital operator.
Setting 2: Advanced Access Level (A) and Setup Access Level (S)
All parameters can be viewed and edited.
Notes on Parameter Access
• If the drive parameters are password protected by A1-04 and A1-05, parameters A1-01 through A1-03, A1-06, and all
A2 parameters cannot be modified.
• If a contact input terminal programmed for "Program lockout" (H1-
modified, even if A1-01 is set to 1 or 2.
• If parameters are changed via serial communication, then it will not be possible to edit or change parameters settings
with the drive's digital operator until an Enter command is issued to the drive from the serial communication.
88
Name
Language Selection
Name
Access Level Selection
Setting Range
0 or 1
Setting Range
0 to 2
monitor parameters.
= 1B) is enabled, parameter values cannot be
YASKAWA ELECTRIC EZZ010930 FSDrive-MV1000 Parameter Guide
Default
1
Default
2