A: Initialization Parameters; A: Initialization Parameters; A1: Initialization - YASKAWA A1000 Series Quick Start Manual

B.1 A: Initialization Parameters
B.1 A: Initialization Parameters
Symbol
Parameter can be changed during run.
Refers to a second motor when the drive is operating two motors. Use multi-function input terminals to switch
Motor 2
between motors.
The A parameter group creates the operating environment for the drive. This includes the parameter Access Level, Motor
Control Method, Password, User Parameters and more.
u

A1: Initialization

No.
(Addr. Name
Hex)
A1-00
(0100)
Language Selection
<1>
A1-01
(0101)
Access Level Selection
<3>
A1-02
Control Method
(0102)
Selection
<1>
A1-03
Initialize Parameters
(0103)
A1-04
Password
(0104)
A1-05
Password Setting
(0105)
A1-06
Application Preset
(0127)
A1-07 DriveWorksEZ
(0128) Function Selection
250
Table B.1 Symbols and Icons Used in Parameter Descriptions
LCD Display
0: English
1: Japanese
Select Language
2: German
0: English
3: French
1: (Japanese)
4: Italian
2: Deutsch
5: Spanish
3: Français
6: Portuguese
4: Italiano
7: Chinese
5: Español
8: Czech
6: Portuguêse
9: Russian
7:
10: Turkish
8: Czech
11: Polish
9: Russian
12: Greek
10: Turkish
11: Polish
Note:
12: Greek
0: View and set A1-01 and A1-04. Uo-oo parameters can also
Access Level
be viewed.
0: Operation Only
1: User Parameters (access to a set of parameters selected by the
1: User Parameters
user, A2-01 to A2-32)
2: Advanced Level
2: Advanced Access (access to view and set all parameters)
Control Method
0: V/f Control 0: V/f Control
1: V/f with PG 1: V/f Control with PG
2: Open Loop Vector 2: Open Loop Vector Control
3: Closed Loop Vect 3: Closed Loop Vector Control
5: PM OpenLoop Vect 5: Open Loop Vector Control for PM
6: PM 6: Advanced Open Loop Vector Control for PM
AdvOpLoopVect 7: Closed Loop Vector Control for PM
7: PM ClosedLoopVct
Init Parameters 0: No initialization
0: No Initialize 1110: User Initialize (parameter values must be stored using
1110: User Initialize parameter o2-03)
2220: 2-Wire Initial 2220: 2-Wire initialization
3330: 3-Wire Initial 3330: 3-Wire initialization
5550: Term->Cntrl Int 5550: oPE04 error reset
When the value set into A1-04 does not match the value set into
Enter Password A1-05, parameters A1-01 through A1-03, A1-06, A1-07, and
A2-01 through A2-32 cannot be changed.
When the value set into A1-04 does not match the value set into
Select Password A1-05, parameters A1-01 through A1-03, A1-06, A1-07, and
A2-01 through A2-32 cannot be changed.
Application Sel
0: General-purpose
0: General
1: Water supply pump
1: Pump
2: Conveyor
2: Conveyor
3: Exhaust fan
3: Exhaust Fan
4: HVAC fan
4: Supply Fan
5: Air compressor
5: Compressor
DWEZ Func Sel
0: DWEZ Disabled
0: Disabled
1: DWEZ Enabled
1: Enabled
2: Digital input (enabled when H1-oo = 9F)
2: Terminal Control
YASKAWA ELECTRIC TOEP C710616 41G YASKAWA AC Drive - A1000 Quick Start Guide
Description
Description
Settings 8 to 12 can only be selected from an LCD
operator with version REV: F or later. The
version is listed on the back of the operator.
Values Page
Default: 0
Range: 0 to 12 –
<2>
Default: 2
–
Range: 0 to 2
Default: 2
Range: 0 to 3; 135
5 to7
Default: 0
Range: 0 to
135
3330;
5550
Default: 0000
Min.: 0000 –
Max.: 9999
Default: 0000
Min.: 0000 –
Max.: 9999
Default: 0
–
Range: 0 to 5
Default: 0
–
Range: 0 to 2