YASKAWA FSDrive-MV1000 Parameter Manual page 92

2.1 A: Initialization
9
Press or
10
Press to cancel the changed settings.
11
The drive returns to the parameter display.
Note: Parameter settings can be edited after entering the correct password. Performing a 2-wire initialization resets the password to
"0000". Reenter the password in parameter A1-05 after drive initialization.
A1-06: Application Preset
■
Note: This function is not available. Always set this parameter to its default setting "0 (disabled)".
A1-90: Calendar Year
■
Sets the year for the calendar. The setting is used for recording event log data and trace data.
Note: Some error arises, so periodic adjustment is recommended.
No.
A1-90
A1-91: Calendar Month and Day
■
Sets the month and day for the calendar. The setting is used for recording event log data and trace data.
Note: Some error arises, so periodic adjustment is recommended.
No.
A1-91
A1-92: Calendar Hour and Minute
■
Sets the hour and minute for the calendar. The setting is used for recording event log data and trace data.
Note: Some error arises, so periodic adjustment is recommended.
No.
A1-92 Calendar Hour and Minute
92
Step
to make sure that the settings can be changed.
Name
Calendar Year
Name
Calendar Month and Day
Name
Setting Range
2000 to 2099
Setting Range
1.01 to 12.31
Setting Range
0.00 to 23.59
YASKAWA ELECTRIC EZZ010930 FSDrive-MV1000 Parameter Guide
Display/Result
-PRMSET- PRG
Control Method
A1-02= 0 ∗2∗
V/F Control
"2"
← →
FWD
-PRMSET- PRG
Control Method
∗2∗
A1-02= 2
Open Loop Vector
← →
FWD
Default
2011
Default
1.01
Default
0.00