Agilent Technologies 6850 Series II User Information page 250

2.
Oven coolant fitting
Inlet coolant fitting
Figure 54. 6850 Cryo coolant fittings
3.
Warning The high pressure LCO
tubing to avoid ruptures.
Released: March 2004
Locate the cryo chassis on the left side of the GC.
The cryo chassis contains one or two fittings for coolant, depending upon
the cryo options purchased. See
If using inlet and oven cooling, install a "Tee" (part 0100-0542) at the
coolant fittings as shown in
spectral-link tubing (part SL-8).
2
6850 Series II GC User Information
Figure
Figure 55. Agilent recommends that you use
requires thick-walled, high pressure stainless steel
Prepare the cryogenic oven cooling system
54.
Installation
page 250 of 256