Agilent Technologies 6850 Series II User Information page 226

6.
250-µm or 320-µm
(Agilent accessory 18599T)
Figure 45. Needle support assembly
7.
Released: March 2004
To install the needle support assembly, select the proper type using
Figure 45. Hold it in your right hand and insert the upper end of the rod
into the plastic guide to the right of the plunger carrier loop.
Turn the needle support assembly so that the flat surface of the slide glides
up and down the syringe carriage tracks as shown in
6850 Series II GC User Information
Needle support foot
530 µm
(Standard)
Automatic Liquid Sampler and Injector
Figure 46.
page 226 of
Syringes
256