Agilent Technologies 6850 Series II User Information page 225

Plunger carrier loop
Bearing clip
Syringe carriage
Figure 44. Removing the needle support assembly
4.
5.
Caution Be careful not to pull the assembly by its metal shaft. The shaft is easily bent.
Released: March 2004
With your finger under the shaft near the bearing on the needle support
assembly, pull gently to release the bearing from the bearing clip in the
syringe carriage.
Carefully use the bearing to pull the rod down until you can lift the
assembly out of the syringe carriage.
6850 Series II GC User Information
Automatic Liquid Sampler and Injector
Syringe
carriage
tracks
Syringes
Guide
Slide
Bearing
page 225 of 256