Miscellaneous - Agilent Technologies 6850 Series II User Information

3.
4.
5.
6.
7.

Miscellaneous

Fuses and batteries
Table 2
These should only be accessed by Agilent service personnel.
Table 2.
Fuse designation
F1, F2
F3, F4
Table 3.
Fuse designation
F1, F2, F3
The battery on the main board is BT1, 3-volt lithium battery, Panasonic
BR3032.
Cleaning
To clean the exterior of the unit, disconnect the power and wipe down with a
damp, lint-free cloth.
Recycling the product
For recycling, contact your local Agilent sales office.
Released: March 2004
Plug the device into a different electrical outlet, so that the device and the
radio or television are on separate electrical circuits.
Make sure that all peripheral devices are also certified.
Make sure that appropriate cables are used to connect the device to
peripheral equipment.
Consult your equipment dealer, Agilent Technologies, or an experienced
technician for assistance.
Changes or modifications not expressly approved by Agilent Technologies
could void the user's authority to operate the equipment.
and Table 3 list the fuses and batteries required for proper operation.
AC Board Fuses
Line voltage
All
All, regular oven
All, fast-heating oven
Main Board Fuses
Fuse rating and type
5 A, 250 VAC, IEC 127 type f (non-time delay), ceramic body
6850 Series II GC User Information
Fuse rating and type
6 A, glass body, IEC Type F, non-time delay
15 A, ceramic body, IEC Type F, non-time delay
20 A, ceramic body, IEC Type F, non-time delay
Important Information
Miscellaneous
page 12 of 256