Agilent Technologies 6850 Series II User Information page 168

Automatic or manual injection with septum nut
Choose a needle, septum nut, and insert based on your column inside diameter.
See
Table 33. Automatic or Manual Injection with a Stainless Steel
Column type and
inside diameter
Fused silica:
530 µm id
320 µm id
250 µm id
200 µm id
Aluminum-clad,
530 µm id
Glass capillary
320 µm id
250 µm id
*
**
Septa
Use a solid septum (5181-1261) for manual injection, or a through-hole septum
(5181-1260) for auto injection.
Released: March 2004
Table 33 to determine the correct hardware.
Needle
Needle
part no.*
5182-0832**
5182-0831
5182-0833
Use cooling tower and duckbill septum
5182-0832
5182-0831
5182-0833
Order removable needle syringe, part no. 5182-0836. If doing a manual injection,
you must also order a plunger button, part no. 5181-8866.
Many other needles can be used to inject onto a 530-µ column. Consult the
Agilent catalog for consumables and supplies for details.
6850 Series II GC User Information
Maintaining a cool on-column inlet
Septum nut Insert
part no. part no.
19245-20580 (no rings)
G1545-80520
19245-20525 (5 rings)
19245-80521
19245-20515 (6 rings)
19245-80521
19245-20510 (1 ring)
G1545-80520 19245-20780 (4 rings)
19245-20670 19245-20550 (3 rings)
19245-20670 19245-20550 (3 rings)
Routine Maintenance: Inlets
page 168 of 256