Ferrules For Packed Metal Columns - Agilent Technologies 6850 Series II User Information

Table 8.
Item, with ferrule ids
1/4-in. graphitized Vespel ferrule, pkg of 10
1.0 mm graphite ferrule, pkg of 10
0.5 mm graphite ferrule, pkg of 10
Column nut
Column cutter

Ferrules for packed metal columns

Table 9
See the Agilent catalog for consumables and supplies for a more complete listing.
Table 9.
Item*
1/4-in. swage stainless steel, pkg of 20 (nut,
front ferrule, back ferrule)
1/8-in. swage stainless steel, pkg of 20 (nut,
front ferrule, back ferrule)
1/4-in. swage brass, pkg of 20 each (nut,
front ferrule, back ferrule)
1/8-in. swage brass, pkg of 20 each (nut,
front ferrule, back ferrule)
1/4-in. graphitized Vespel ferrule, pkg of 10
1/8-in. graphitized Vespel ferrule, pkg of 10
* O-ring and ferrule ids
Ferrules that are prepared improperly cause leaks and contamination. Here are
some hints to avoid problems.
Released: March 2004
Hardware Used with Capillary Columns
lists some of the nuts and ferrules used with packed metal columns.
Nuts and Ferrules for Packed Metal Columns
6850 Series II GC User Information
Ferrules for packed metal columns
Typical use
Inlet/detector liner/adapters
0.75 mm and 530 µm capillary col-
umns
100 µm, 200 µm, 250 µm, and
320 µm capillary columns
Connect column to inlet or
detector
Cutting capillary columns
Typical use Part no.
1/4-in. 5080-8753
1/8-in. 5080-8751
1/4-in. 5080-8752
1/8-in. 5080-8750
Inlet/detector 5080-8774
liner/adapters
1/4-in. columns
1/8-in. columns 0100-1107
Columns and Traps
Part no.
5080–8774
5080–8773
5080–8853
G2630–80720
5181–8836
page 23 of 256