Calibration:level - Agilent Technologies U3606B Programmer's Reference Manual

Dc power supply

Hide thumbs Also See for U3606B:

Table of Contents

CALibration Subsystem

CALibration:LEVel

This command selects the minimum or maximum calibration point as outlined

in the calibration procedures in the U3606B Service Guide.

Refer to the U3606B Service Guide for detailed procedures, including how to

set up the output calibration connections, the specified calibration points,

how to initiate the calibration of the output voltage or current, and so forth.

& SOUR:VOLT:RANG 8

& CAL:LEV MAX

{MINimum|MAXimum|LOAD1|LOAD2|LOAD3|LOAD4}

Range of values

MINimum|MAXimum|LOAD1|LOAD2|

This command sets the current output range to

S2 (8 V/3 A).

This command sets calibration point to 8 V.

Default value

U3606B Programmer's Reference