Table of Contents
Advertisement
SYSTem:DATA:INTerval
Syntax
SYSTem:DATA:INTerval <second>
This command sets the interval time for the data logging loop.
SYSTem:DATA:INTerval?
This command queries the interval time for the data logging loop.
Parameter
second
Remarks
The SYSTem:DATA:INTerval command stores the interval time in the
nonvolatile memory.
Example
& SYST:DATA:INT 10
& SYST:DATA:INT?
$ +1.000000E+01
U3606B Programmer's Reference
Item
Type
Numeric
Range of values
1 to 99999 seconds
This command sets the interval time for the
data logging loop to approximately 10 s.
This query returns the interval time for the data
logging loop.
SYSTem Subsystem
SYSTem:DATA:INTerval
Default value
1 second
13
309
Advertisement
Table of Contents
