Agilent Technologies U3606B Programmer's Reference Manual page 259

• If a range change is in progress (due to the autoranging setting) when you
• The instrument is set to 10 mA, with autoranging enabled, after a Factory
Example
& PWID:CURR:RANG 0.1
& PWID:CURR:RANG?
$ +1.000000E-01
See also
"CONFigure:PWIDth"
"[SENSe:]PWIDth:CURRent:RANGe:AUTO"
U3606B Programmer's Reference
query the instrument, the value "+9.910000E+37" will be returned. Wait
for the instrument to select an appropriate range before querying the
instrument again.
Reset (*RST command).
on page 114
[SENSe:]PWIDth:CURRent:RANGe[:UPPer]
This command selects the 100 mA range.
This query returns the range selected.
on page 248
SENSe Subsystem 10
247