Initiate[:Immediate] - Agilent Technologies U3606B Programmer's Reference Manual

5 INITiate Subsystem

INITiate[:IMMediate]

INITiate[:IMMediate]
Syntax
INITiate[:IMMediate]
This command changes the state of the triggering system from the "idle" state
to the "wait-for-trigger" state. Measurements will begin when the specified
trigger conditions are satisfied following the receipt of the
INITiate[:IMMediate] command.
N O T E
Remarks
• Storing readings in the memory using the INITiate[:IMMediate]
• To retrieve the readings from memory, use the FETCh? command. The
120
The
INITiate[:IMMediate]
reading from memory.
command is faster than sending readings to the output buffer using the
READ? command.
ABORt command may be used to return to idle.
command also clears the previous
U3606B Programmer's Reference