Agilent Technologies U3606B Programmer's Reference Manual page 251

• If a range change is in progress (due to the autoranging setting) when you
• The instrument is set to 100 mV, with autoranging enabled, after a Factory
Example
& DCYC:VOLT:RANG 10
& DCYC:VOLT:RANG?
$ +1.000000E+01
See also
"CONFigure:DCYCle"
"[SENSe:]DCYCle:VOLTage:RANGe:AUTO"
U3606B Programmer's Reference
query the instrument, the value "+9.910000E+37" will be returned. Wait
for the instrument to select an appropriate range before querying the
instrument again.
Reset (*RST command).
on page 116
[SENSe:]DCYCle:VOLTage:RANGe[:UPPer]
This command selects the 10 V range.
This query returns the range selected.
on page 240
SENSe Subsystem 10
239