Table of Contents
Advertisement
11
SOURce Subsystem
SOURce:SQUare:RANGe
SOURce:SQUare:RANGe
Syntax
SOURce:SQUare:RANGe {30 V|8 V|AUTO|MAX|MIN|DEF}
This command sets the range for the square-wave output. You can select to
either operate the U3606B in the S1 (30 V/1 A) range, the S2 (8 V/
3 A) range, or the S1S2 auto-range (30 V/1 A with 10 Hz to 4800 Hz). The range
selected is applied for all output operations (CV mode, CC mode, square-wave
output, and sweep functions).
Parameter
value
Remarks
You cannot change the range when the output is enabled (OUTPut[:STATe]
ON command). The output should always be in standby state
(OUTPut[:STATe] OFF command) before the range or output function is
changed.
Example
& SOUR:SQU:RANG 7.5
See also
"SOURce:VOLTage:RANGe"
"SOURce:CURRent:RANGe"
262
Item
Type
Numeric
Range of values
• 30 V|MAX|DEF
• 8 V|MIN
• AUTO
This command sets the voltage output range to
S2 (8 V/3 A).
on page 260
on page 261
Default value
30 V
U3606B Programmer's Reference
Advertisement
Table of Contents
