[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
Syntax
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <value>
This command sets the amplitude for the constant voltage output.
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]?
This query returns a numeric value that represents the amplitude of the
constant voltage output.
N O T E
Parameter
value
Example
& VOLT 10.0
& VOLT?
$ +1.000000E+01
U3606B Programmer's Reference
This command cannot change the range of the output. You should use the
SOURce:VOLTage:RANge
Item
Type
Numeric
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
command to change range of the output.
Range of values
Range
Min
S1
0 V
S2
0 V
S2m
0 V
S1S2 (AUTO)
0 V
This command sets the immediate output
voltage level to 10 V.
This query returns the output voltage level.
SOURce Subsystem
Default value
Max
31.5 V
Min
8.4 V
1.05 V
31.5 V
11
271