Psc - Agilent Technologies U3606B Programmer's Reference Manual

16 IEEE-488.2 Common Commands

*PSC

*PSC
Syntax
*PSC {0|1}
The *PSC (Power-on Status Clear) command enables or disables the clearing
of certain enable registers at power-on. With *PSC 0 specified, these registers
are not cleared at power-on. All enable registers are affected.
N O T E
*PSC?
This query returns "0" (do not clear at power on) or "1" (clear at power on).
Parameter
setting
Example
& *PSC 0
& *PSC?
$ 0
340
The *PSC command does not affect the clearing of the condition or event
registers, just the enable registers.
Item Type
Boolean
Range of values
0|1
This command disables the power-on clearing
of the affected registers.
This query returns the power-on status clear
setting.
Default value
1
U3606B Programmer's Reference