Calculate:hold:threshold - Agilent Technologies U3606B Programmer's Reference Manual

2 CALCulate Subsystem

CALCulate:HOLD:THReshold

CALCulate:HOLD:THReshold

Syntax
CALCulate:HOLD:THReshold <value>
This command sets the threshold of the hold function.
CALCulate:HOLD:THReshold?
This query returns a numeric value that represents the threshold of the hold
function.
Parameter
value
Remarks
• The hold threshold does not reset when calculation functions are enabled
• The hold threshold value is stored in the nonvolatile memory. It is not
Example
& CALC:HOLD:THR 1
& CALC:HOLD:THR?
$ +1.000000E+00
36
Item Type
Numeric
by the CALCulate[:STATe] command, nor when the
CALCulate:FUNCtion command is sent with CALCulate:STATe set to
ON.
affected by a power-on cycle, Factory Reset (*RST command), Instrument
Preset (SYSTem:PRESet command), or function change.
Range of values
0.0% to 9.9%
This command sets the hold threshold to 1%.
This query returns the hold threshold.
Default value
0.5%
U3606B Programmer's Reference