Table of Contents
Advertisement
MEASure[:VOLTage]:ACDC|DCAC?
Syntax
MEASure[:VOLTage]:ACDC|DCAC?
This command first resets all AC+DC voltage measurement parameters and
trigger parameters to their default values. Then, it configures the instrument
for AC+DC voltage measurements and immediately triggers a measurement. A
single reading is returned.
C A U T I O N
Parameters
range
resolution
U3606B Programmer's Reference
[<range>|AUTO|MAX|MIN|DEF[,{<resolution>|MAX|MIN|DEF}]]
• The maximum range parameter is 750 V
The rms voltage is waveform dependent. A sine wave is limited to
750 V
AC MAINS are further limited to CAT II (300V).
• See the "Safety Information" section in the U3606B User's and
Service Guide for a complete discussion of the safety features, and
the procedures for safe operation of this instrument.
Item
Type
Numeric
Numeric
(rms), but a 1000 V
ac
pk
Range of values
• 100 mV|MIN
• 1 V
• 10 V
• 100 V
• 750 V|MAX
• AUTO
• MAX (4½ digit)
•
10 uV
•
100 uV
•
1 mV
•
10 mV
•
100 mV
MEASure Subsystem
MEASure[:VOLTage]:ACDC|DCAC?
, which is set by MAX.
rms
square wave is safe. Connections to
• MIN (5½ digit)
•
1 uV
•
10 uV
•
100 uV
•
1 mV
•
10 mV
7
Default value
AUTO
MIN
137
Advertisement
Table of Contents
