11
SOURce Subsystem
[SOURce:]VOLTage[:LEVel]:SCAN:DWELling
[SOURce:]VOLTage[:LEVel]:SCAN:DWELling
Syntax
[SOURce:]VOLTage[:LEVel]:SCAN:DWELling <value>
This command sets the dwelling time for the voltage scan signal.
[SOURce:]VOLTage[:LEVel]:SCAN:DWELling?
This query returns a numeric value that represents the dwelling time in the
voltage scan signal.
Parameter
value
Remarks
• When the output range is changed (SOURce:VOLTage:RANGe or
• The scan dwelling time is stored in the nonvolatile memory. It is not
Example
& VOLT:SCAN:DWEL 1
& VOLT:SCAN:DWEL?
$ +1.000000E+00
282
Item
Type
Numeric
SOURce:CURRent:RANGe command), the scan dwelling time will remain
unchanged.
affected by a power-on cycle, Factory Reset (*RST command), Instrument
Preset (SYSTem:PRESet command), or function change.
Range of values
1 s to 99 s
This command sets the dwelling time in the
voltage scan signal to 1 s.
This query returns the dwelling time in the
voltage scan signal.
Default value
2 s
U3606B Programmer's Reference