Agilent Technologies U3606B Programmer's Reference Manual page 160

7 MEASure Subsystem
MEASure:RESistance?
Example 1
& MEAS:RES?
$ +1.321300E+04
Example 2
& MEAS:RES? 1000, 0.1
$ +4.271500E+02
148
This command configures the instrument for
2-wire resistance measurements, triggers the
instrument to take a reading, and then transfers
the reading to the instrument output buffer. The
default range (autorange) and resolution (5½
digits) are used.
This command configures the instrument for
2-wire resistance measurements, triggers the
instrument to take a reading, and then transfers
the reading to the instrument output buffer. The
Ω
1000 range is selected with 0.1
resolution.
U3606B Programmer's Reference
Ω