4
CONFigure Subsystem
CONFigure:CURRent:ACDC|DCAC
CONFigure:CURRent:ACDC|DCAC
Syntax
CONFigure:CURRent:ACDC|DCAC
This command first resets all AC+DC current measurement parameters and
trigger parameters to their default values. Then, it configures the instrument
for AC+DC current measurements but does not initiate the measurement.
N O T E
Parameters
range
resolution
96
[<range>|AUTO|MAX|MIN|DEF[,{<resolution>|MAX|MIN|DEF}]]
The
CONFigure:CURRent:ACDC|DCAC
instrument in the "wait-for-trigger" state. Use the
INITiate[:IMMediate]
CONFigure:CURRent:ACDC|DCAC
"wait-for-trigger" state.
Item
Type
Numeric
Numeric
or
READ?
Range of values
• 10 mA|MIN
• 100 mA
• 1000 mA
• 3 A|MAX
• AUTO
• MAX (4½ digit)
• MIN (5½ digit)
•
1 uA
•
10 uA
•
100 uA
•
1 mA
command does not place the
command in conjunction with the
to place the instrument in the
Default value
AUTO
MIN
•
0.1 uA
•
1 uA
•
10 uA
•
100 uA
U3606B Programmer's Reference