8
MEMory Subsystem
MEMory:STATe:RECall:AUTO
MEMory:STATe:RECall:AUTO
Syntax
MEMory:STATe:RECall:AUTO {0|1|OFF|ON}
This command disables or enables the automatic recall of the last power-down
instrument state when power is turned on.
The valid options are:
• 1|ON: Automatically recalls the last power-off state (storage location 0)
• 0|OFF: A factory reset is issued when the power is cycled.
MEMory:STATe:RECall:AUTO?
This query returns a boolean value that represents the automatic recall status
of the source multimeter.
Parameter
auto
Remarks
• With the *SAV command, you can use location 0 as an extra instrument
• When shipped from the factory, storage locations 1 through 16 are empty
• A Factory Reset (*RST command) does not affect the mode set.
164
when the power is cycled.
Item
Type
Boolean
state. However, keep in mind that location is automatically overwritten with
the power-down state when power is cycled.
and the instrument is configured such that a Factory Reset (*RST
command) is issued when power is cycled.
Range of values
0|1|OFF|ON
Default value
1
U3606B Programmer's Reference