Agilent Technologies U3606B Programmer's Reference Manual page 135

Example
& CONF 10, 0.0001
& INIT:CONT ON
& FETC?
$ +4.271500E-03
See also
"INITiate[:IMMediate]"
"FETCh?"
"READ?"
U3606B Programmer's Reference
on page 120
on page 329
on page 331
INITiate Subsystem
INITiate:CONTinuous
This command configures the instrument for
DC voltage measurements. The 10 V range is
selected with 0.1 mV resolution.
This command places the instrument in the
free-run mode. Measurements are made
continuously and the readings are stored in the
instrument memory.
This command transfers the reading from the
instrument memory to the output buffer.
5
123