15
Root Commands
FETCh?
Example
& CONF:RES
& INIT
& FETC?
$ +9.999632E+06
See also
Chapter
"INITiate[:IMMediate]"
330
4, "CONFigure Subsystem," starting on page 79
on page 120
This command configures the instrument for
2-wire resistance measurements. The default
range (autorange) and resolution (5½ digits)
are used.
This command places the instrument in the
"wait-for-trigger" state, triggers a
measurement, and stores the reading in the
instrument memory.
This command transfers the reading from the
instrument memory to the output buffer.
U3606B Programmer's Reference