Table of Contents
Advertisement
*OPC
Syntax
*OPC
The *OPC (OPeration Complete) command sets the "Operation complete" bit
(bit 0) in the Standard Event register at the completion of the current
operation.
*OPC?
This query returns the value "+1" to the output buffer at the completion of the
current operation.
N O T E
Remarks
• The purpose of this command is to synchronize your application with the
• Note the difference between the *OPC command and the *OPC? query. The
Example
& *OPC?
$ 1
U3606B Programmer's Reference
For more information on the bit definitions of the Standard Event register
and the SCPI status diagram, see
instrument.
latter returns "1" to the output buffer at the completion of the current
operation.
IEEE-488.2 Common Commands
"SCPI Status System"
This query returns the value "+1" to the output
buffer at the completion of the current
operation.
16
*OPC
on page 12.
339
Advertisement
Table of Contents
