Table of Contents
Advertisement
SYSTem:DEFault
Syntax
SYSTem:DEFault
This command set the default factory settings without the calibrated data to
the nonvolatile memory. The instrument will reset after the command is
completed.
Remarks
The SYSTem:DEFault command also performs memory sanitization and
clears all the logging data.
Example
& SYST:DEF
See also
"*RST"
U3606B Programmer's Reference
on page 342
SYSTem Subsystem
SYSTem:DEFault
This command resets the instrument to its
factory default state.
13
311
Advertisement
Table of Contents
