Table of Contents
Advertisement
14
TRIGger Subsystem
TRIGger:SOURce
Example
& CONF
& TRIG:SOUR BUS
& INIT
& *TRG
& FETC?
$ +9.985308E+00
See also
Chapter
"INITiate[:IMMediate]"
Chapter
"SYSTem:PRESet"
"FETCh?"
"READ?"
"*RST"
"*TRG"
326
4, "CONFigure Subsystem," starting on page 79
on page 120
7, "MEASure Subsystem," starting on page 131
on page 315
on page 329
on page 331
on page 342
on page 350
This command configures the instrument for
DC voltage measurements. The default range
(autorange) and resolution (5½ digits) are used.
This command selects the bus (software)
trigger source.
This command places the instrument in the
"wait-for-trigger" state.
This command triggers the instrument.
This command transfers the reading from the
instrument memory to the output buffer.
U3606B Programmer's Reference
Advertisement
Table of Contents
