Table of Contents
Advertisement
PD1000A Power Device Measurement System for Advanced Modeling
Startup Guide
A
Configure the InTEST Thermal
Platform Controller
Configure the E5810B Gateway for the InTEST Controller
The following process ensures that the InTEST Thermal Platform Controller can
communicate with the host PC.
Figure 48 E5810B Front Panel showing IP Address
1 Connect the E5810B to the host PC with a LAN Cable and the InTEST
Thermal Platform Controller with a GPIB Cable.
2 Plug in the E5810B power adapter to the E5810B DC power port.
3 Turn on the PC, the E5810B, and the InTEST Thermal Platform controller.
4 After searching for a DHCP, the E5810B displays its IP address on its front
panel display.
95
Advertisement
Table of Contents
