Step1: Gather All Pd1000A Required Equipment; Pd1000A System Hardware Components - Keysight PD1000A Startup Manual

Step1: Gather All PD1000A Required Equipment

Step1: Gather All PD1000A Required Equipment

Your PD1000A shipment arrives in separate boxes. Carefully inspect each
shipment for any shipping damage. Report any damage to the shipping agent
immediately, as such damage is not covered by warranty.
Refer to
Advanced Modeling Hardware Overview," on page 9 for overall system
configuration.

PD1000A System Hardware Components

Verify that your PD1000A system includes the following hardware items:
* Requires EasyEXPERT version
**Additional RF adapters are available at:
Keysight PD1000A Power Device Measurement System Startup Guide
Figure 1, "Complete PD1000A Power Device Measurement System for
*
– Keysight B1506A
Power Device Analyzer/Curve Tracer with one of the
following options:
-- B1506A Option 101 or 102, includes opt. H21 20A/3 kV/C-V/Gate
Charge/Thermal Chamber Package
-- B1506A Option. 103 or 104, includes opt. H51 500A/3 kV/C-V/Gate
Charge/Thermal Chamber Package
-- B1506A Option 105 or 106, includes opt. H71 1500A/3 kV/C-V/Gate
Charge/Thermal Chamber Pkg.
– (Alternative to B1506A) Keysight B1505A Power Device Analyzer/Curve
Tracer with one of the following options:
-- B1505AP-H21 3 kV / 20 A / C-V / Fixture Pack
-- B1505AP-H51 3 kV / 500 A / C-V / Fixture Pack
-- B1505AP-H71 3 kV / 1500 A / C-V / Fixture Pack
– Keysight E5080A ENA Vector Network Analyzer
– Keysight B2902A Precision Source/Measure Unit
– Keysight PD1000A-SPK Accessory Kit. Includes:
-- Quantity 2, Keysight PD1000A High Current Bias T Networks
-- Three device test fixtures:
--Test Fixture for TO-220 devices
--Test Fixture for TO-247 devices
--Test Fixture for Surface Mount Devices (SMDs)
-- Quantity 2, Type 'N' Male to SMA Female Adapter
-- Quantity 2, 7 inch SMA connector cables
-- Quantity 8, Banana plug to Banana plug cables (4 red, 4 black)
6.1.1738.9870
or later.
Keysight Adapters.
**
13