Table of Contents
Advertisement
IV and CV Device Characterization
2 Connect the analyzer to its test chamber and make cable connections as
3 After completing the cable connections described above, verify the operation
4 Install the InTEST hot plate in the test chamber and connect the thermal
Thermal Platform
The B1506A or B1505A test chamber can be equipped with a Thermal Platform
(Hot Plate) from InTEST (model HP289-PM) for controlling DUT temperature. The
Thermal Platform is not available from Keysight. The platform consists of a
temperature controller and a hot plate that is installed inside the B1506A Test
Chamber. The controller connects to the Hot Plate inside the B1506A Test
32
-- HCSMU for high-current measurement on drain/collector
-- MPSMU for low-current measurement on drain/collector
-- MFCMU for capacitance measurement
-- N1259A test fixture with module selector option
-- N1272A device capacitance selector
-- N1273A capacitance test fixture
-- Cables and adapters for the connection
– For H51 (500 A) or H71 (1500 A) configuration:
-- MCSMU or HCSMU for gate
-- HVSMU for high-voltage measurement on drain/collector
-- N1265A Ultra High Current Expander/Fixture
-- MCSMU or HCSMU for Icon (I control) of N1265A
-- MCSMU or HCSMU for Vcon (V control) of N1265A
-- MPSMU for low-current measurement on drain/collector
-- MFCMU for capacitance measurement
-- N1272A device capacitance selector
-- N1273A capacitance test fixture
-- Cables and adapters for the connection
described in the B1505A documentation:
– B1505A Configuration and Connection Guide,
https://literature.cdn.keysight.com/litweb/pdf/B1505-90000.pdf
of the test chamber. For instructions, see:
– B1505A User Guide, Section 3. See:
https://literature.cdn.keysight.com/litweb/pdf/B1505-90000.pdf?id=1355
658
platform controller. See Thermal Platform below.
Keysight PD1000A Power Device Measurement System Startup Guide
IV and CV Test Requirements
Advertisement
Table of Contents
