Keysight PD1000A Startup Manual page 89

Power device measurement system for advanced modeling

Hide thumbs Also See for PD1000A:

Table of Contents

IV and CV Demo

Figure 44 IV and CV Demo Display

Click the

Keysight PD1000A Power Device Measurement System Startup Guide

1 To run the PD1000A demonstrations, check the Enable Demo Mode check

box on the display screen.

2 Select one or more tests for demo plots. If you select multiple tests, the

demos to run sequentially.

3 Click the

button at the bottom of the screen. As with a full test, the

graphic schematic changes to show the different test that is running. A

sample result (*.mdm) format file is also produced.

to run the demo program again.

Running the PD1000A Control Software Demonstration Mode

Table of Contents