Table of Contents
Advertisement
SMART2 Operation
the effects of high ionospheric activity. GLIDE works in all code positioning modes, including
single point, DGNSS and SBAS.
Refer to the NovAtel white paper on
038 Pseudorange/Delta-Phase (PDP) and GLIDE Filters
from www.novatel.com/support/search/.
3.3.2 PDP and GLIDE Configurations
Pseudorange/Delta-Phase (PDP) and GLIDE position filters can be used for single-frequency
single point, WAAS or DGNSS positioning. Refer to the PDPFILTER command and PDPMODE
command .
To reset the PDP or GLIDE filter:
pdpfilter reset
To enable the PDP filter:
pdpfilter enable
Ensure the PDPFILTER command is used before the PDPMODE command. Set the PDP type
and kinematic type according to the application. For most kinematic applications:
pdpmode relative dynamic or pdpmode relative auto
The rest of the setup is position type and log dependent according to the application. . Also refer
to the NovAtel application note
from our web site at www.novatel.com/support/.
3.4 Enabling SBAS Positioning
SMART2 receivers are capable of SBAS positioning. This positioning mode is enabled using the
SBASCONTROL command:
sbascontrol enable auto
When the command is entered, the SMART2 automatically tracks the SBAS that is operating in
the region (e.g., WAAS or EGNOS) and applies the corrections from the service. On a simulator,
leave the test mode parameter off or specify NONE explicitly. For more on SBAS, refer to applic-
ation note
APN-051 Positioning Modes of Operation
www.novatel.com/support/).
3.5 Enabling PPP
L-Band equipped receivers can achieve sub-metre position accuracy using correction data
received from geostationary satellites. To use the L-Band corrections, an L-Band-capable
receiver model is required (refer to our web site
information on NovAtel L-Band-capable antennas).
For more information on L-Band positioning, refer to:
NovAtel Application Notes: APN-061: NovAtel CORRECT with PPP using TerraStar Corrections
l
available from
the
Agriculture Commands and Logs Reference Manual
l
and/or
visit
www.novatel.com/support
l
visit
www.novatel.com/products/novatel-correct
l
SMART2 Installation and Operation Manual 1
GLIDE Technology
APN-038 Pseudorange/Delta-Phase (PDP) and GLIDE
www.novatel.com/support/search/items/Application%20Note
for more information on GLIDE and
along with other information available
(additional Application Notes available at
www.novatel.com/products/gnss-antennas
for log/command details
APN-
available
for
25
Advertisement
Table of Contents
