Restoring The Configuration; Restoring The Previous Software Version - Avaya Scopia Elite 6000 Administrator's Manual

Restoring the configuration

About this task
You can import the settings of a saved Scopia
device on your network. You can use the saved configuration file to restore the settings to the
®
current Scopia Elite 6000 MCU or to configure another Scopia
The imported configuration file is a compressed file that contains a .val file and a .xml file.
Note:
If you import a configuration file from another Scopia
login credentials, you must enter the login credentials to gain access to the particular Scopia
Elite 6000 MCU.
Procedure
1. Log in to Equinox Management.
2. Click Devices.
3. In the left pane, select Media Servers.
Equinox Management displays the list of Scopia
4. Select the checkbox next to the Scopia
5. Click Manage > Update Configuration File.
Equinox Management displays the Update Configuration window.
6. Select the configuration file.
7. Click Apply.
The restore procedure permanently deletes the current configuration and disconnects all
active conferences.
Result
Equinox Management restores the configuration and restarts Scopia

Restoring the previous software version

About this task
Contact Customer Support to restore the previous software version.
Important:
Do not import a saved configuration to the MCU after the downgrade. An older version of the
MCU configuration might not support the new configuration values.
December 2017
Upgrading, Backing up and Restoring the Scopia Elite MCU
®
Elite 6000 MCU configuration file from a storage
®
Elite 6000 MCU instance.
Administrator Guide for Avaya Scopia
Comments on this document? infodev@avaya.com
®
Elite 6000 MCU.
®
Elite 6000 MCU that requires different
®
Elite 6000 MCU.
®
Elite 6000 MCU.
®
Elite 6000 MCU
®
61