Step 15. Connect Power Cables - Avaya Scopia XT Series Quick Setup Manual

Step 14. Attach A/C adapter clip
shown in the picture
i

Step 15. Connect power cables

Connect the device to the power strip
1. Connect the IEC320 cables (included) to
the monitor.
2. Connect the XT5000 A/C adapter to the
international power strip.
Connect the appropriate country power
3.
cable provided with your XT5000 codec to
the power strip.
4. If you need a longer power cable, use the
IEC320 cable extender.
Extender
CODEC XT5000
Monitor 1
Spare Monitor 2
8 | avaya.com
Position the A/C
i i
adapter inside the clip
IEC320 C14 IEC320 C13
(Relevant country power
Black Cord
cable)
Avaya Scopia XT Meeting Center | Quick Setup Guide
Step 16. Fix Cables to the Mount
The Avaya Scopia XT Meeting Center provides
several solutions of cable management that can be
used to suit your needs.
Feed cables out through
1 A
the front of the unit
Release channel
2 A
Feed cables
2 B
through channel
Ensure channel locates
2 C
Clip cables into management clip
4 C
underneath base to secure
Avaya Scopia XT Meeting Center | Quick Setup Guide
Cut velcro wraps to
3 A
required length
Use velcro wraps to
3 B
attach to crossbar
Pass cable Pull cables clear
4 A 4 B
through of the base
holes in base
avaya.com | 9