Instrument Cluster Descriptions - Jeep WRANGLER 2020 Owner's Manual

Instrument Cluster Descriptions

Base Instrument Cluster Descriptions
1. Tachometer
Indicates the engine speed in revolutions

per minute (RPM x 1000).
CAUTION!
Do not operate the engine with the
tachometer pointer in the red area. Engine
damage will occur.
2. Temperature Gauge
The temperature gauge shows engine

coolant temperature. Any reading within
the normal range indicates that the
engine cooling system is operating satis-
factorily.
The pointer will likely indicate a higher

temperature when driving in hot weather,
up mountain grades, or when towing a
trailer. It should not be allowed to exceed
the upper limits of the normal operating
range.
WARNING!
A hot engine cooling system is dangerous.
You or others could be badly burned by steam
or boiling coolant. You may want to call an
authorized dealer for service if your vehicle
overheats.
CAUTION!
Driving with a hot engine cooling system could
damage your vehicle. If the temperature gauge
reads "H" pull over and stop the vehicle. Idle
the vehicle with the air conditioner turned off
until the pointer drops back into the normal
range. If the pointer remains on the "H", turn
the engine off immediately and call an
authorized dealer for service.
3. Instrument Cluster Display
The instrument cluster display features a

driver-interactive display. Refer to
"Instrument Cluster Display" in this
chapter for further information.
GETTING TO KNOW YOUR INSTRUMENT PANEL
4. Fuel Gauge
The pointer shows the level of fuel in the

fuel tank when the ignition switch is in
the ON/RUN position.
The fuel pump symbol points

to the side of the vehicle where
the fuel filler door is located.
5. Speedometer
Indicates vehicle speed.

Premium Instrument Cluster Descriptions
1. Tachometer
Indicates the engine speed in revolutions

per minute (RPM x 1000).
CAUTION!
Do not operate the engine with the
tachometer pointer in the red area. Engine
damage will occur.
2. Instrument Cluster Display
The instrument cluster display features a

driver-interactive display. Refer to
"Instrument Cluster Display" in this
chapter for further information.
127
3