Jeep WRANGLER 2020 Owner's Manual page 52

50 GETTING TO KNOW YOUR VEHICLE
Icon
Temperature Control
Temperature Control regulates the temperature of the air forced through the climate system. The temperature increases as
you turn the temperature control knob clockwise. The temperature decreases as you turn the temperature control knob
Heater Only
counterclockwise.
Heater Only
Turning the temperature control knob clockwise increases the heating temperature and turning the temperature control
knob counterclockwise decreases the heating temperature.
Blower Control
Blower Control regulates the amount of air forced through the climate system. There are seven blower speeds available.
The blower speeds increase as you turn the blower control knob clockwise from the lowest blower setting. The blower
speed decreases as you turn the blower control knob counterclockwise.
Mode Control
Turn the mode control knob to adjust airflow distribution. The airflow distribution mode can be adjusted so air comes from
the instrument panel outlets, floor outlets, defrost outlets and demist outlets.
Panel Mode
Panel Mode
Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of
air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow
direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from these
outlets.
Description