Five-Position Transfer Case - If Equipped - Jeep WRANGLER 2020 Owner's Manual

Five-Position Transfer Case — If Equipped
Four-Wheel Drive Gear Selector
The transfer case provides five mode positions:
2H (Two-Wheel Drive High Range)

4H AUTO (Four-Wheel Drive Auto High Range)

4H PT (Four-Wheel Drive Part Time High

Range)
N (Neutral)

4L (Four-Wheel Drive Low Range)

For additional information on the appropriate
use of each transfer case mode position, see
the information below:
2H
Two-Wheel Drive High Range — This range is for
normal street and highway driving on dry, hard
surfaced roads.
4H AUTO
Four-Wheel Drive Auto High Range — This range
sends power to the front wheels. The four-wheel
drive system will be automatically engaged
when the vehicle senses a loss of traction.
Additional traction for varying road conditions.
4H PT
Four-Wheel Drive Part Time High Range — This
range maximizes torque to the front driveshaft,
forcing the front and rear wheels to rotate at the
same speed. This range provides additional
traction for loose, slippery road surfaces only.
STARTING AND OPERATING
N (Neutral)
WARNING!
You or others could be injured or killed if you
leave the vehicle unattended with the transfer
case in the NEUTRAL (N) position without first
fully engaging the parking brake. The transfer
case NEUTRAL (N) position disengages both the
front and rear driveshafts from the powertrain,
and will allow the vehicle to roll, even if the
automatic transmission is in PARK (or manual
transmission is in gear). The parking brake should
always be applied when the driver is not in the
vehicle.
Neutral — This range disengages both the front
and rear driveshafts from the powertrain. To be
used for flat towing behind another vehicle.
Refer to "Recreational Towing" in "Starting And
Operating" for further information.
229
5