Getting To Know Your Instrument Panel; Instrument Cluster Descriptions - Jeep Wrangler Owner's Manual

I C D
NSTRUMENT LUSTER ESCRIPTIONS
1. Tachometer
 Indicates the engine speed in revolutions per
minute (RPM x 1000).
CAUTION!
Do not operate the engine with the tachometer pointer
in the red area. Engine damage will occur.
2. Temperature Gauge
 The temperature gauge shows engine coolant
temperature. Any reading within the normal range
indicates that the engine cooling system is oper-
ating satisfactorily.
 The pointer will likely indicate a higher tempera-
ture when driving in hot weather, up mountain
grades, or when towing a trailer. It should not be
allowed to exceed the upper limits of the normal
operating range.
WARNING!
A hot engine cooling system is dangerous. You or others
could be badly burned by steam or boiling coolant. It is
recommended to call an authorized dealer for service if
your vehicle overheats page 236.
Ú
CAUTION!
Driving with a hot engine cooling system could damage
your vehicle. If the temperature gauge reads "H" pull
over and stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops back into
the normal range. If the pointer remains on the "H",
turn the engine off immediately and call an authorized
dealer for service.
3. Instrument Cluster Display
 The instrument cluster display features a driver
interactive display page 74.
Ú

GETTING TO KNOW YOUR INSTRUMENT PANEL

4. Fuel Gauge
 The pointer shows the level of fuel in the fuel tank
when the ignition switch is in the ON/RUN posi-
tion.
 The fuel pump symbol points to the
side of the vehicle where the fuel filler
door is located.
5. Speedometer
 Indicates vehicle speed.
 A chime will sound when the vehicle speed is
above 120 km/h.
73