Technical Specifications; Vehicle Identification Number; Brake System; Wheel And Tire Torque Specifications - Jeep WRANGLER 2020 Owner's Manual

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found
on the left front corner of the A pillar, visible
from outside of the vehicle through the
windshield.
Vehicle Identification Number
NOTE:
It is illegal to remove or alter the VIN plate.

TECHNICAL SPECIFICATIONS

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic
systems loses normal capability, the remaining
system will still function. However, there will
be some loss of overall braking effectiveness.
You may notice increased pedal travel during
application, greater pedal force required to slow
or stop, and potential activation of the Brake
Warning Light.
In the event power assist is lost for any reason
(i.e., repeated brake applications with the engine
off) the brakes will still function. However, the
effort required to brake the vehicle will be much
greater than that required with the power system
operating.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly
calibrated torque wrench using a high quality
six sided (hex) deep wall socket.

Torque Specifications

Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
130 Ft-Lbs
M14 x 1.50
(176 N·m)
**Use only authorized dealer recommended
lug nuts/bolts and clean or remove any dirt or
oil before tightening.
Inspect the wheel mounting surface prior to
mounting the tire and remove any corrosion or
loose particles.
367
Lug Nut/Bolt
Socket Size
22 mm
8