Jeep WRANGLER 2020 Owner's Manual page 366

364 SERVICING AND MAINTENANCE
3. Remove the carpet under the load floor and
the side support and then pull the carpet out.
Rear Load Floor
1 — Side Supports
2 — Load Floor
4. When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs, B
pillar, console, and refasten grommets.
Cargo Carpet (Four Door Models) With Gap
Hider:
1. Remove the grommets under the rear seat
(one left and one right).
2. Pull the carpet out to the front and open the
carpet split around the seat belt attachment
and under the center seat bracket.
Under Rear Seat
1 — Carpet Split
2 — Grommets
3 — Rear Carpet
3. When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs,
B pillar, console, and refasten grommets.
Side Carpet (Four Door Models):
1. Remove the side grommet (one left and
one right).
2. Pull the carpet out starting on the top
flange, then all around the perimeter and
open the carpet split around the seat belt
attachment.
Inside Sidewall
1 — Top Flange
2 — Grommet
3 — Side Carpet
3. When reinstalling carpet please perform
these steps in reverse order making sure
that the carpet is tucked under the scuffs,
B pillar, console, and refasten grommets.