Rear Head Restraints - Four Door Models - Jeep WRANGLER 2020 Owner's Manual

WARNING! (Continued)
A loose head restraint thrown forward in a

collision or hard stop could cause serious
injury or death to occupants of the vehicle.
Always securely stow removed head
restraints in a location outside the occu-
pant compartment.
ALL the head restraints MUST be rein-

stalled in the vehicle to properly protect the
occupants. Follow the reinstallation instruc-
tions above prior to operating the vehicle or
occupying a seat.
Rear Head Restraints — Four Door Models
The rear seat is equipped with nonadjustable,
but foldable, outboard head restraints, as well
as an adjustable, removable center head
restraint.
To fold the outboard head restraint, pull on the
inner release lever, located on the upper part of
the rear seat.
Rear Head Restraint Lever
Rear Head Restraint Folded
GETTING TO KNOW YOUR VEHICLE
To return the head restraint to its upward
position, lift up on the head restraint until it
locks into place.
To raise the center head restraint, lift up on
the head restraint. To lower the center head
restraint, push the adjustment button, located
at the base of the head restraint, and push
down on the head restraint.
To remove the center head restraint, push the
release button, located on the base of the head
restraint, and pull upward on the head restraint.
To install the head restraint, hold the release
button while pushing downward on the head
restraint. Refer to "Occupant Restraint
Systems" in "Safety" for information on child
seat tether routing.
NOTE:
Lower the center head restraint to avoid contact
with the center console when folding the seat
down.
39
2