Jeep WRANGLER 2020 Owner's Manual page 66

64 GETTING TO KNOW YOUR VEHICLE
3. Using the provided #40 Torx head driver
and ratchet, unscrew the two Torx head
screws on each lift assist mechanism, then
lift the mechanism up and away from the
vehicle.
Lift Assist Mechanism
1 — Lock Position
2 — Torx Head Screw
3 — Torx Head Screw
4. Pull the release lever on top of the rail
rearward to release the side link from the
track.
Release Lever Location
Pull To Release Top From Track
5. Repeat on the opposite side.
6. Utilizing two people, lift the soft top up and
away from the vehicle, careful to avoid the
vehicle's sport bar, trim, and tire carrier.
Store the soft top in a safe, clean, and dry
location.
Utilize Two People To Remove Soft Top
7. Using the provided #50 Torx head driver
and ratchet, unscrew the Torx screw on both
rear corners of the vehicle, removing the
retainers.
Remove Rear Retainers