Bodywork; Protection From Atmospheric Agents; Body And Underbody Maintenance; Preserving The Bodywork - Jeep WRANGLER 2020 Owner's Manual

BODYWORK

Protection From Atmospheric Agents

Vehicle body care requirements vary according to
geographic locations and usage. Chemicals that
make roads passable in snow and ice and those
that are sprayed on trees and road surfaces
during other seasons are highly corrosive to the
metal in your vehicle. Outside parking, which
exposes your vehicle to airborne contaminants,
road surfaces on which the vehicle is operated,
extreme hot or cold weather and other extreme
conditions will have an adverse effect on paint,
metal trim, and underbody protection.
The following maintenance recommendations
will enable you to obtain maximum benefit from
the corrosion resistance built into your vehicle.
What Causes Corrosion?
Corrosion is the result of deterioration or
removal of paint and protective coatings from
your vehicle.
The most common causes are:
Road salt, dirt and moisture accumulation

Stone and gravel impact

Insects, tree sap and tar

Salt in the air near seacoast localities

Atmospheric fallout/industrial pollutants


Body And Underbody Maintenance

Cleaning Headlights
Your vehicle is equipped with plastic headlights
and fog lights that are lighter and less
susceptible to stone breakage than glass
headlights.
Plastic is not as scratch resistant as glass and
therefore different lens cleaning procedures
must be followed.
To minimize the possibility of scratching the
lenses and reducing light output, avoid wiping
with a dry cloth. To remove road dirt, wash with
a mild soap solution followed by rinsing.
Do not use abrasive cleaning components,
solvents, steel wool or other aggressive
material to clean the lenses.
SERVICING AND MAINTENANCE

Preserving The Bodywork

Washing
Wash your vehicle regularly. Always wash

your vehicle in the shade using Mopar Car
Wash, or a mild car wash soap, and rinse the
panels completely with clear water.
If insects, tar, or other similar deposits have

accumulated on your vehicle, use Mopar
Super Kleen Bug and Tar Remover to
remove.
Use a high quality cleaner wax, such as

Mopar Cleaner Wax to remove road film,
stains and to protect your paint finish.
Take care never to scratch the paint.
Avoid using abrasive compounds and power

buffing that may diminish the gloss or thin
out the paint finish.
357
7