Jeep WRANGLER 2020 Owner's Manual page 198

196 SAFETY
Recommendations For Attaching Child Restraints
Combined Weight of the Child
Restraint Type
Rear-Facing Child
Restraint
Rear-Facing Child
More than 65 lbs (29.5 kg)
Restraint
Forward-Facing Child
Restraint
Forward-Facing Child
More than 65 lbs (29.5 kg)
Restraint
Lower Anchors And Tethers For CHildren
(LATCH) Restraint System
LATCH Label
+ Child Restraint
Up to 65 lbs (29.5 kg)
Up to 65 lbs (29.5 kg)
Your vehicle is equipped with the child restraint
anchorage system called LATCH, which stands
for Lower Anchors and Tethers for CHildren.
The LATCH system has three vehicle anchor
points for installing LATCH-equipped child
seats. There are two lower anchorages located
at the back of the seat cushion where it meets
the seatback and one top tether anchorage
located behind the seating position. These
Use Any Attachment Method Shown With An "X" Below
LATCH – Lower
Seat Belt Only
Anchors Only
X X
X
LATCH – Lower
Seat Belt + Top
Anchors + Top
Tether Anchor
Tether Anchor
X
anchorages are used to install LATCH-equipped
child seats without using the vehicle's seat
belts. Some seating positions may have a top
tether anchorage but no lower anchorages. In
these seating positions, the seat belt must be
used with the top tether anchorage to install the
child restraint. Please see the following table for
more information.
X
X