Dual Top Four Door Models - If Equipped; Removing The Soft Top - Four Door Models - Jeep WRANGLER 2020 Owner's Manual

DUAL TOP FOUR DOOR MODELS — IF
EQUIPPED
If your vehicle is equipped with a Dual Top, the
soft top system will be provided in a separate
box located in the rear of the vehicle for
shipping purposes only. The soft top and the
hard top are to be used independently. Your
vehicle warranty will not cover damage resulting
from both tops being installed at the same time.
For your convenience, a tool kit is provided with
your vehicle located in the center console. This
kit includes the necessary tools required for the
operations described in the following sections.
All pieces fit into the ratchet for easy use.
Provided Tools
1 — #50 Torx Head Driver
2 — #40 Torx Head Driver
3 — 15mm Socket
4 — Ratchet
Removing The Soft Top — Four Door Models
1. Fully lower the soft top. Refer to
"Soft Top — Four Door Models" in
this section.
CAUTION!
Failure to follow the next steps could result in
damage to the Soft Top or vehicle.
GETTING TO KNOW YOUR VEHICLE
2. Make sure the lift assist mechanism on
both the left and right sides are in the "lock"
position, and an audible "click" is heard
when pushing down on the #1 bow from
each of the lift assist mechanisms before
removing.
Lock Position
63
2