Setting The Following Distance In Acc - Jeep WRANGLER 2020 Owner's Manual

248 STARTING AND OPERATING
The ACC system maintains set speed when

driving up hill and down hill. However, a slight
speed change on moderate hills is normal.
In addition, down shifting may occur while
climbing uphill or descending downhill. This is
normal operation and necessary to maintain
set speed. When driving up hill and down hill,
the ACC system will cancel if the braking
temperature exceeds normal range (over-
heated).

Setting The Following Distance In ACC

The specified following distance for ACC can be
set by varying the distance setting between four
bars (longest), three bars (long), two bars
(medium) and one bar (short). Using this
distance setting and the vehicle speed, ACC
calculates and sets the distance to the vehicle
ahead. This distance setting displays in the
instrument cluster display.
Distance Setting 4 Bars (Longest)
Distance Setting 3 Bars (Long)
Distance Setting 2 Bars (Medium)
Distance Setting 1 Bar (Short)
To increase the distance setting, push the
Distance Setting — Increase button and release.
Each time the button is pushed, the distance
setting increases by one bar (longer).